Static Control Products
ElectraGuard® ESD Epoxy Floor Paint
Designed and Manufactured Only By United SCP
For Use on Concrete, Wood and Existing VCT Floors. An Exceptional Value. Permanently Compliant to S20.20. Ten Year Life Expectancy and Proudly Made in the U.S.A.
The ElectraGuard High Gloss System starts with 3 coats of a 2 part true ESD Epoxy (a catalyst and a base). The Epoxy is applied with paint rollers and when dry, sealed with 2 topical coats of a ElectraThane and a topical coat of ElectraGlaze applied with a microfiber mop.
With the correct preparation, ElectraGuard floors are seamless for ease of maintenance and an outstanding high tech appearance. ElectraGuard easily handles heavy loading and is resistant to high concrete vapor emissions (the number one cause of ESD Tile and thick set epoxy failures). Maintenance is similar to ESD tiles but with the ElectraGuard High Gloss Systems scuff marks may be removed with a high speed burnisher!
The ElectraGuard High Gloss System is suited for application on a variety of substrates including concrete, existing well bonded VCT (standard tiles), table tops, wooden crates, asbestos laden tiles, sheet vinyl and more. Its range of electrical conductivity insures an exceptional interface with mobile items in the ESD program such as carts and personnel. ElectraGuard does not contain carbon; hence it is extremely clean and provides one of the lowest tribocharging characteristics of any flooring product on the market.
Static Conductivity that NEVER fails an ESD audit.
Twenty year track record of Proven Performance!
Performance that rivals ESD tiles at < 1/3rd the cost!
Easily handles THE heaviest of loads.
Excellent slip resistance - even when wet!
Microporous - Allows for use over high vapor emission concrete.
Compliant for use in ALL electronic manufacturing environments. A perfect choice for server rooms, printing, additive manufacturing and more.
ElectraGuard High Gloss Install Gallery
Special of the Month, Quantity Discounts!
Save over $80.00 per case or 5 gallon container!
Note: All ESD thin set epoxy and ESD floor paints have particular nuances for more on this please click here.
New! Maintain the "look"
and wear resistance of ElectraGuard ESD flooring throughout your entire facility!
Use the ESD Version where you need it and save money
by using the standard version where you don't!
NC (not for static control) at a cost of approximately $0.50
© 1996 -
All rights Reserved
This page last
updated or checked for accuracy on
© 1996 - 2020 All rights Reserved
This page last updated or checked for accuracy on